产品概述
水平垂直法阻燃性能测定仪是由北京北广精仪仪器设备有限公司（北京生产仪器设备厂家）按照国标GB1210-92 （符合：GB/T2408-1996、GB5455-85、GB2408-80、GB4609-84）精密生产，仪器质量好，价格比经销商便宜很多，无可挑剔。
产品名称有：水平垂直法阻燃性能测定仪，水平垂直燃烧测试仪，塑料水平垂直燃烧性能试验仪，水平垂直燃烧性能试验仪
一、本仪器技术指标：
1、生灯施加火焰时间有10s、12s、30s可选择，精度±0.2s，倒记时，撤退报警提醒。
2、本生灯内径：9.5mm±0.3mm
3、本生灯可在0-450范围内倾斜
4、本生灯蓝色火焰高度：15mm-45mm可任意调节，配有火焰高度标尺
5、试样夹zui大夹指厚度：≤13mm
6、试样夹垂直方向调整距离：≤100mm
7、试样夹水平方向调整距离：≤70mm
8、水平试样夹可900收放
9、可燃气源：甲烷、天然气、液化石油气、煤气
二、塑料试样指标：
1、 电子点火，点火距试样距离：150mm，蓝色火焰高度：20mm±2mm；
2、 燃烧试验空间大于0.5立方米；
3、 燃烧器自动定时定位；
4、 施焰时间：0～99.99秒任意设置；
5、 有焰燃烧，无焰燃烧时间均自动记录，数码显示；
6、 火焰高度可调整，并可配置火焰温度测量装置；
7、 配有可燃气体泄露报警装置；
8、 试样尺寸：长125mm±5mm；宽13.0mm±0.3mm；厚3.0mm±0.2mm；
三：技术标准：
本试验仪适用于检验和评定塑料材料的燃烧特性，是根据IEC60695-11-4、IEC60695-11-10、IEC60695-11-3,IEC60695-11-20、IEC60695-11-2。美国 UL94 标准《设备和器具部件用塑料材料的可燃性试验》中规定的有关条款。采用积分式进气点火系统，燃烧延时仅0.1秒，确保气体的充分燃烧时间；黑色背景，多功能火焰量规，火焰调节工作变得简单；箱体全不锈钢，观察窗口大；进口高精度数显仪表，外形美观；集多项国内外同类产品的优点，性能稳定，操作方便。
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.vFlame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester
.
Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.Flame retardant properties of horizontal and verticaldetermination instrument is composed of Beijing all precisioninstrument equipment Co., Ltd. （Beijing productionequipment manufacturers） in accordance with the national standard GB1210-92 （with GB/T2408-1996, GB5455-85,GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.
Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level
Index, the instrument technology:
1, students apply flame lamp time 10s, 12s, 30s can choose,accuracy of ± 0.2S, countdown, evacuation alarm.
2, the Bunsen burner diameter: 9.5mm ± 0.3mm
3, the Bunsen burner tilting in the range of 0-450
4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale
5, the sample holder maximum finger thickness: ≤ 13mm
6, the sample holder perpendicular to the direction ofadjustment range: ≤ 100mm
7, the sample holder horizontal distance adjustment: ≤ 70mm
8, the level of the sample holder can be 900 and
9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas
Two, the plastic sample index:
1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;
2, the combustion test space of more than 0.5 cubic meters;
3, the burner automatic timing and positioning;
4, the flame time: 0 ~ 99.99 seconds set arbitrarily;
5, flaming, flameless combustion time are recorded automatically, digital display;
6, the flame height can be adjusted, and configure a flame temperature measuring device;
7, with a combustible gas leakage alarm device;
8, the sample size: length 125mm, width 13.0mm ± 0.3mm± 5mm; thickness; 3.0mm ± 0.2mm;
Three: technical standard:
The combustion characteristics of the testing instrument fortesting and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3,IEC60695-11-20, IEC60695-11-2. The relevant provisions ofthe United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustiondelay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter,beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operationconvenient.
The main purpose of this instrument, four:
Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment,low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools,electronic instruments, electrical instruments, electricalconnectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, is also applicable to insulation materials, engineering plastic or othersolid combustible materials industry. For the plastics industry,inspection departments and scientific research units.
Horizontal and vertical burning tester is according to therelevant provisions of the IEC60695, GB5169 standarddesign and manufacturing requirements, effects of earlystage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material andparts of samples were determined by the method of ISO845apparent relative combustion characteristics of horizontal,vertical flammability test density of not less than 250kg/m'foam. Horizontal and vertical burning test using thestandard size of the Bunsen burner and the specific gassource （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state ofa sample application of combustion timing, according to theduration of ignition, combustion and burning hot length to assess their flammability and fire hazard.
Principle five, the instrument:
One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end isexposed to the flame to the provisions. By measuring thelinear burning rate, combustion behavior evaluation samplelevel; by measuring its embers and afterglow time, burningand burning particles drop, vertical combustion performance evaluation of specimens.
Six, as long as the terms:
1, Yu Yan: ignition source is removed, the continuous flamematerials specified conditions.
2, Yu Yan: afterflame time duration.
3, in the afterglow: flame after termination, or no flame,remove the ignition source, under defined test conditions,continuous glow material.
4, the afterglow time: afterglow duration.
Additional introduction about the instrument:
What is the vertical combustion method? （horizontal burning test）
Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.
Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）
Note: Beijing BBEF precision instrument equipment Co., Ltd.other independent production of hot-selling products:（rubber plastic series）
Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature,arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine,plastic sliding, melt index apparatus （melt flow rate tester）,plastic ball indentation hardness tester, low temperature brittleness tester.
- 上一个： 漏电起痕试验仪 厂家
- 下一个： 热变形维卡软化点温度测定仪 厂家
