当前位置:首页   >    产品中心   >    熔体流速测试仪   >    熔融指数仪   >   熔体流动速率测定仪 厂家 产品展示

熔体流动速率测定仪 厂家

型 号

更新时间2023-08-04

厂商性质生产厂家

报价

产品描述:此款熔融指数试验机为改良款,增加了众多功能,在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高,
具有国内一般熔融指数试验机所*的优势和性价比。

产品概述

 产品名称:熔融指数试验机,熔体流动速率测定仪 

型号: BRR
一、满足标准:
ISO 1133,ASTM D1238,GB/T3682
  二、产品说明:
此款熔融指数试验机为改良款,增加了众多功能,在仪器配置、仪器使用寿命、操作便利性、测试精度方面有大幅提高,
具有国内一般熔融指数试验机所*的优势和性价比。
三、产品特点:
1、升温速度快,超调量极小             2、恒温精度高
3、在填料之后,能迅速恢复恒温状态     4、试验参数校准并修正方便
5、可采用手动、自动切料试验方法       6、中文液晶显示 
7、配有打印机,将测试结果自动打印输出
四、主要技术参数 
1、挤压出料部分
出料口直径:Φ2.095±0.005毫米,出料口长度:8.000±0.025毫米
装料筒直径:Φ9.550±0.025毫米,装料筒长度:152± 0.1毫米
活塞杆头直径:9.475±0.015毫米,活塞杆头长度:6.350±0.100毫米
2、标准试验负荷(共8级全304#不锈钢砝码)
3、温度范围:常规室温——400℃(500℃可选)
4、恒温精度:±0.5℃  5、显示分辨率:0.1℃
6、切料方式:可选手动或自动切料7、温度恢复时间:小于4分钟
8、打印:微型打印机自动打印输出 9、电源电压:AC220V±10%   50HZ
五、配件
序 号 名  称      单 位   数 量      备注
   1、 砝码        套      1     计8件(1#在1级负荷内)
0.325㎏、1.2㎏、2.16㎏、3.8㎏、5.0㎏、10.0㎏、12.5、21.6k g
   2、  砝码托盘    件      1        在1级负荷内
   3、  装料斗      件      1         4、  口模清理棒  件      1
   5、 装料杆      件      1         6、  料筒清理杆  件      1        组合件
   7、 活塞杆      件      1 (在1级负荷内)
   8、 口模        件      1         9、  水准仪      件      1
   10、纱布        卷      2         11、 打印纸      卷      2
六、仪器特点:
1、全套砝码采用304不锈钢材料制作,防止生锈影响外观及砝码精度
2、加热筒采用304不锈钢制作,因熔融指数试验机长期在高温下工作(zui高可达400~500度),高温下金属材料极易氧化生锈
3、双传感器配置,控温精确,温度梯度更好,寿命更长
4、按国标要求,加料后增加四分钟倒计时功能
5、RS232接口,可直接连接电脑输出数据(选配)
6、开机后可直接显示上次测试条件,避免每次用户都重新设置试验参数,减少操作人员工作量
7、zui高温度可达450~500度(订货时需特殊说明)
8、可长时间测试强腐蚀性塑料而无损仪器精度、
 
 
 
 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

 

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

 

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

 

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic aProduct Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,ndProduct Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,Product Name: melt index tester, melt flow rate tester

Model: BRR

One, meet the standards:

ISO 1133, ASTM D1238, GB/T3682

Two, product description:

The melt index test machine is improved, increased the number of function, the instrument configuration, equipment life, convenient operation, measurement accuracy is greatly improved,

With the domestic general melt index test machine there is nothing comparable to this advantage and price.

Three, product characteristics:

1, fast heating speed, overshoot is small, high precision constant temperature 2

3, in the packing, can quickly restore the constant 4, test parameter calibration and correction of convenience

5, can use manual, automatic cutting test method 6, Chinese LCD display

7, equipped with a printer, the results of the test automatically print output

Four, the main technical parameters

1, extruding and discharging part

The outlet diameter: 2.095 ± 0.005 mm, outlet length: 8 ± 0.025 mm

The charging barrel diameter: 9.550 ± 0.025 mm, charging barrel length: 152 ± 0.1 mm

Piston rod head diameter: 9.475 ± 0.015 mm, length of piston rod head: 6.350 ± 0.100 mm

Test load of 2, standard (a total of 8 grade 304# stainless steel weight

3, the temperature range: conventional room temperature -- 400 ℃ (500 ℃ optional)

4, the precision of constant: ± 0.5 ℃, 0.1 ℃ display resolution: 5

The 6, cutting way: optional manual or automatic cutting 7, temperature recovery time: less than 4 minutes

8, printing: micro printer is used to print the output of 9, the power supply voltage: AC220V ± 10% 50HZ

Five, accessories

The sequence number name a number of notes

1, weight 1 meter 81# at 1 level load

0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg, 10 kg, 12.5, 21.6k G

2, weight tray 1 at 1 load

3, hoppers 14, die cleaning rod 1

5, charging 16 rods, cylinder cleaning rod 1 assembly

7, the rod of 1at 1 load

8, die 19, level 1

10, gauze volume 211, Volume 2 printing paper

Six, characteristics of the instrument:

1, a full set of weights adopts 304 stainless steel materials, prevent rust affect the appearance and weight precision

2, the heating cylinder adopts 304 stainless steel production, because the melt index test machine working under high temperature for a long timeup to 400~500, high temperature metal materials are easy to rust

3, dual sensor configuration, precise temperature control, temperature gradient is better, longer life

4, according to the national standards, the feeding after adding four minutes countdown function

5, the RS232 interface, can be directly connected to the computer output dataoptional)

6, after the boot can directly display the last test conditions, avoid every time the user to set the test parameters, reduce the workload of operators

7, the highest temperature can reach 450~500 degreeswhen ordering special instructions

8, long time test of strong corrosive plastic and nondestructive instrument accuracy,nondestructive instrument accuracy,

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
联系人:陈丹
手机:
18911395947
点击这里给我发消息