国标GB3960塑料滑动摩擦磨损试验机北京哪家强

国标GB3960塑料滑动摩擦磨损试验机北京哪家强 

产品名称：塑料滑动摩擦磨损试验机

Product Name: plastic sliding friction and wear testing machine

型号：M-200  

Model: M-200

一、国标GB3960塑料滑动摩擦磨损试验机北京哪家强 特点：

First, the characteristics of:

适用于塑料制品及橡胶制品或其他复合材料的滑动摩擦，摩损性能测试。也可对试验中试样的摩擦力、摩擦系数和摩损量进行测定。

制造标准：GB3960 塑料滑动摩擦磨损试验方法

Suitable for sliding friction, friction and wear properties of plastics and rubber or other composites. The friction coefficient and the friction coefficient and the friction coefficient of the test specimens can be measured.

制造标准：GB3960 塑料滑动摩擦磨损试验方法

Manufacturing standard: GB3960 plastic sliding friction and wear test method

二、 主要适用范围及功能

Two, the main scope of application and function

本仪器是按照GB3960设计并制造。适用于塑料制品及橡胶制品或其他复合材料的滑动摩擦，摩损性能测试。也可对试验中试样的摩擦力、摩擦系数和摩损量进行测定。本机采用16位单片机电子处理系统，使得本仪器各项测试指标精度非常高。由于集成程度很高，所以设备本身的稳定性*，本机具有一次设置，全自动运行，实验结束后自动停机，并检测摩损程度。是各个科研单位，大学，企业实验室的*检测设备。

This instrument is designed and manufactured in accordance with GB3960. Suitable for sliding friction, friction and wear properties of plastics and rubber or other composites. The friction coefficient and the friction coefficient and the friction coefficient of the test specimens can be measured. This machine adopts 16 bit single chip microcomputer electronic processing system, makes this instrument each test target precision is very high. Due to the high degree of integration, the stability of the equipment itself is excellent, the machine has a set, automatic operation, automatic shutdown after the end of the experiment, and detect the degree of friction. It is a necessary testing equipment for all scientific research institutes, universities and enterprises.

三、 功能特点：

Three, functional characteristics:

1, sample size: 30mm*7mm*6mm + 0.1 mm

2、转动速度： 0-200转/分 连续可调

2, the rotation speed: 0-200 transfer / sub continuous adjustable

3、负 荷： 196N ± 0.2%（可扩充到392N）

3, load: 196N + 0.2% (can be extended to 392N)

4、摩擦环尺寸：￠40×10mm 倒角0.5×45°外圆表面与内圆同心度偏差小于0.01

4, the size of the friction ring: 40 * 10mm 0.5 * 45 degree chamfer surface of the outer circle and inner circle concentricity deviation is less than 0.01

5、摩擦力矩： 0--4N•m ±0.5%

5, friction torque: M / 0--4N + 0.5%

6、计 数 器： 0-9999小时

6, counter: 0-9999 hours

7、砝码重量：4KG砝码一件，1KG砝码4件，可实现重量叠加功能。

7, weight weight: 4KG weight of one, 1KG weight 4 pieces, can achieve weight superposition function.

四、精度：

Four, accuracy:

1、速度精度：1%

1, speed accuracy: 1%

2、负荷精度：0.5%

2, load accuracy: 0.5%

3、摩擦力矩精度：1%

3, friction torque accuracy: 1%

4、计数器精度：1S

4, counter accuracy: 1S

5、传感器测量精度：1% FS

5, sensor measurement accuracy: 1% FS

五、 主要配置：

   Five, the main configuration:

1、主机一台

1, a host

2、高精度扭矩传感器一只

2, high precision torque sensor

3、彩晶显示控制系统箱一台

3, color crystal display control system box

4、4Kg砝码两件（备用一套）

4, 4Kg weight two (spare one set)

5、标准磨擦环四件（备用两件）

5, standard friction ring four (spare two)

6、台式微型打印机一台

6, desktop micro printer a

7、产品使用说明书一份

7, a copy of the instructions of the product

8、产品合格证

8, product qualification certificate

9、产品装箱单一份

9, product packing list

10、整机重量：约45公斤

10, the weight of the whole machine: about 45 kg

 六、 主要技术规格：

  Six, the main technical specifications:

1、zui大试验力：2000N

1, the maximum test force: 2000N

2、试验力示值相对误差:在满量程的10%以上，不超过±2%

2, the experimental value of the relative error: in the full range of more than 10%, not more than 2%

3、试验力示值重复性相对误差：在满量程的10%以上，不超过2%

3, test force repeatability of the relative error: in the full range of more than 10%, not more than 2%

4、摩擦力矩测量范围：0-15N.m

4, friction torque measurement range: 0-15N.m

5、摩擦力矩示值相对误差： 在满量程的10%以上，不超过±3%

5, the value of the relative error of the friction torque: in the full range of more than 10%, not more than 3%

6、摩擦力矩示值重复性相对误差：在满量程的10%以上，不超过3%

6, the friction torque repeatability of the relative error: in the full range of more than 10%, not more than 3%

7、下试样轴转速：400，200r/min 可选择（无级调速）

7, under the specimen shaft speed: 400200r/min can choose (stepless speed regulation)

8、上试样轴转速：360，180r/min

8, on the sample shaft speed: 360180r/min

9、上试样轴向zui大移动距离：±4mm

9. The maximum moving distance of the sample on the sample is: + 4mm

10、时间控制范围：数显控制1s-9999min

10, time control range: digital control 1s-9999min

1 1、转数控制范围:数显控制 1-999999

11, speed control: digital control 1-999999

1 2、曲线记录及数据处理：由HX计算机实现对各个参数的测量显示及数据处理，可时实显示时间-摩擦力矩等多种曲线

12, curve records and data processing: the HX special computer to achieve the measurement of the various parameters of the display and data processing, can be real time display time - friction torque and other curves

产品相关关键字： 塑料滑动摩擦磨损 滑动摩擦磨损试验机 摩擦磨损试验机

Plastic sliding friction and wear sliding friction and wear testing machine friction and wear testing machine