介电击穿强度试验仪，绝缘漆漆膜击穿强度试验仪

介电强度击穿电压试验仪，击穿强度试验仪， 电压击穿试验仪， 绝缘材料击穿电压试验仪，耐电压击穿强度试验仪 介电击穿强度试验仪,耐电压强度试验仪

Dielectric strength tester breakdown voltage, breakdown strength tester, and breakdown voltage tester, insulation tester breakdown voltage, breakdown voltage resistance strength tester dielectric breakdown strength tester, voltage resistance strength tester

产品名称：电压击穿试验仪

Product name: breakdown voltage tester

产品型号：BDJC-50KV

Product model: BDJC - 50 kv

控制方式：微机控制

Control mode: microcomputer control

满足标准：GB1408-2006 绝缘材料电气强度试验方法

Meet the standard: GB1408 2006 insulation dielectric strength test method

GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验

GB/T1695-2005 rubber power frequency voltage breakdown strength and voltage resistance strength test

GB/T3333 电缆纸工频电压击穿试验方法

GB/T3333 cable ZhiGong frequency voltage breakdown test method

HG/T 3330绝缘漆漆膜击穿强度测定法

HG/T 3330 insulating varnish film breakdown strength measurement

GB12656 电容器纸工频电压击穿试验方法

GB12656 ZhiGong frequency capacitor voltage breakdown test method

ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.

ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test method.

一、电压击穿试验仪 ，适用范围及功能

One, the breakdown voltage tester, scope of application and function

电压击穿试验仪, 主要适用于固体绝缘材料（如：塑料、橡胶、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质）在工频电压或直流电压下击穿强度和耐电压的测试。

Breakdown voltage tester, mainly is suitable for the solid insulating material （such as plastic, rubber, thin film, resin, mica, ceramic, glass, insulating paint, etc.） under power frequency voltage or dc voltage breakdown strength and withstand voltage test.

电压击穿试验仪,由电脑控制，通过我公司自主研发的全新智能数字集成电路系统与软件控制系统两部分来完成，使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。

Breakdown voltage tester, controlled by computer, through my company independent research and development of new inligent digital integrated circuit system and the software two parts to complete the control system, make the pressure rise rate really uniform and accurate, and can accuray measure the data of leakage current.

可实时动态绘制试验曲线，显示试验数据，判断准确，并可保存，分析，修改，打印试验数据。

Can real-time dynamic test curve drawing, according to the test data, accurate, and can save, analysis, modify, print the test data.

1、本仪器在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性。

1, the instrument in the test process for booster breakdown process real-time curve drawing, each test the pressure rise curve is made up of different color, after the test can be superimposed contrast material test data repeatability.

2、可以随时调取当前及历史试验数据进行查看，编辑及修改实验结果。

2, can at any time to view the current and historical test data to be obtained, edit and modify the results.

3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。

3, test conditions and storage paths can be modified at any time during the process of test and automatic storage test results.

4、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果。

4, during the trial, may at any time through the software to determine whether the test is valid, convenient screening test results.

5、可对软件设置密码，生成密码保护，做到专机专人操作，避免无关人员误操作。

5, can set the password to the software, password protection, do the special personnel operation, to avoid irrelevant personnel wrong operation.

6、 可对试验结果编辑修改后打印，方便操作 更加人性化。

6, editor of the experimental results can be revised print, convenient operation more humanization.

7、可对一组试验中曲线数据的试验结果是否进行人为选定 。

7, the curve in a set of test data of test results are selected.

8、本仪器采用先进的无触点原件匀速调压方式，淘汰同类产品中机械传动升压方式。

8, the instrument adopts advanced non-contact original uniform regulation way, way out similar products in the mechanical transmission booster.

二、电压击穿试验仪 ，技术要求：

Second, the breakdown voltage test instrument, technical requirements:

01、输入电压： 交流 220 V

01, input voltage, ac 220 V

02、输出电压： 交流 0--50 KV ;

02, output voltage: communication 0, 50 KV;

直流 0—50 KV

Dc 0, 50 KV

03、电器容量： 3KVA

03, electric capacity: 3 kva

04、高压分级： 0-10KV，0--50KV，

04, high-pressure sizing: 0 to 10 kv, 0, 50 kv,

05、升压速率：

05, pressure rise rate:

100V/S

100 v/S

200V/S

200 v/S

500 V/S

500 V/S

1000 V/S

1000 V/S

2000V/S

2000 v/S

3000V/S 等

3000 v/S, etc.

（备注：满足标准要求并可以根据用户需求设定不同的升压速率）

（note: meet the standard requirements and can be set according to user requirements different pressure rise rate）

06、试验方式：

06, test mode:

直流试验：1、匀速升压 2、梯度升压 3、耐压试验

Dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

交流试验：1、匀速升压 2、梯度升压 3、耐压试验

Ac test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

07、电压击穿试验仪 ，试验介质：空气，试验油

07, breakdown voltage tester, the test medium: air, test oil

08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。

08, installation high sensitivity of overcurrent protection device to ensure the sample breakdown when cut off the power supply within 0.05 S.

09、采用智能集成电路进行匀速升压。

09, inligent integrated circuit is adopted to improve the pressure at a constant speed.

10、支持短时间内短路试验要求。

10 short circuit test requirements, support for a short time.

11、电压试验精度： ≤ 1％。

11, voltage test accuracy: 1% or less.

12、试验电压连续可调： 0--50KV。

12, test voltage adjustable: 0, 50 kv.

13、电流可采集到m*。

13, current can be collected to mA.

14、出具*计量单位校准检定证书或出具客户计量单位的证书。

14, issued by national level measuring unit calibration verification certificate, or issue the certificate of customers specify the units of measurement.

15、电源：220V±10%的单相交流电压和50Hz±1%的频率。

15, power supply: 220 v + / - 10% of single-phase ac voltage and frequency of 50 hz + 1%.

16、电流电压稳定度: 外界电源电压波动10%时

16, current voltage stability: the power supply voltage fluctuations of 10%

三、 安全保护

3, safety protection

电压击穿试试验仪器，电路保护控制：

Breakdown voltage test equipment, circuit protection control:

（1）超压保护 （2）过流保护 （3）短路保护（4）漏电保护 （5）软件误操作保护

（1） the overpressure protection over-current protection （2） （3） short circuit protection （4） leakage protection misoperation （5） software protection

高压输入回路断电保护控制：

High voltage power input circuit protection control:

（1）总电源开关 （2）调压器复位开关 （3）高压断电开关

（1） the total power switch （2） voltage regulator reset switch （3） the high voltage power switch

（4）试验箱门安全开关 （5）高压回路开关 （6）漏电保护开关

（4） test the door safety switch （5） high pressure circuit switch （6） leakage protection switch

四、主要配置

Four, the main configuration

标准配置

The standard configuration

序号 名称 配置 备注

Serial number name of the configuration notes

01 试验主机 一台

01 a test hosts

02 控制装置 一套

02 a control device

03 试验电极 二套（国标1408.1）

03 2 sets test electrode （1408.1 gb）

04 试验油箱 二只

04 test two tank

05 放电系统 一套

A set of 5 discharge system

06 控制系统 一套

6 a set of control system

07 数据采集系统 一套

7 a set of data acquisition system

08 试验软件 一套 光盘

Test software is a set of CD

09 计算机 一套 品牌

09 computer a brand

10 喷墨打印机 一台 品牌

10 a brand inkjet printer

11 产品使用说明书 一份

A 11 product instruction for use

12 计量证书 一份

12 a measurement certificate

13 产品合格证 一份

A 13 product certificate

四、电压击穿试验仪,设备安全说明：

Fourth, the breakdown voltage test apparatus, equipment safety instructions:

1、设备要安装单独的保护地线。接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

1, the protection of the equipment to install a separate ground wire. Protection earthed, main is to reduce the sample breakdown of strong electromagnetic interference on around. Also can avoid the control computer is out of control.

2、该试验设备的电路设有多项保护措施，主要有：过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

2, the test equipment is equipped with multiple protection circuit, mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc discharge test alarm, etc.

3、接地要求： 仪器需要单独接地，接地附合国家标准要求，金属棒深埋地下至少要1.5米以下。

3, grounding requirements: instrument need separate grounding, grounding conforms to the national standard requirements, the metal bar must be at least 1.5 meters deep underground.

4、该试验设备的电路设有多项保护措施，主要有：过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

4, the test equipment is equipped with multiple protection circuit, mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc discharge test alarm, etc.

五、电压击穿试验仪常规型号为：

Five, the breakdown voltage tester conventional models as follows:

BDJC-10KV

BDJC - 10 kv

BDJC-20KV

BDJC - 20 kv

BDJC-30KV

BDJC - 30 kv

BDJC-50KV

BDJC - 50 kv

BDJC-100KV

BDJC - 100 kv

北广公司其它绝缘材料检测仪器:

All other insulating materials testing instruments:

BDJC-0-100KV 介电击穿试验仪

BDJC - 0-100 - kv dielectric breakdown test instrument

BDJC系列绝缘材料工频率介电击穿试验仪

BDJC series insulation work frequency dielectric breakdown test instrument

BDJC系列电压介电强度试验仪器

BDJC series voltage and dielectric strength test instrument

BDJC系列 电压击穿试验仪

BDJC series breakdown voltage tester

BDJC系列绝缘漆漆膜击穿强度试验仪

BDJC series insulating varnish film breakdown strength tester

BDJC电容器纸工频电压击穿试验仪

BDJC ZhiGong frequency capacitor voltage breakdown test instrument

EST-121 体积表面电阻率测定仪

EST - 121 volume and surface resistivity meter

GDAT-A介质损耗测试仪/介电常数测试仪

GDAT - A dielectric constant dielectric loss tester/tester

GDAT-C新型介电常数介质损耗测试仪

GDAT - C new dielectric constant dielectric loss tester

BDH 耐漏电起痕试验仪

BDH tracking resistance tester

BDH-B耐电弧试验仪

BDH - B arc resistance tester

中国检测行业与验证服务的*者和智领者，帮助众多检测质检单位和学校教研单位提供一站式的全面质量解决方案。

Testing industry in China and the tip of the validation service and wisdom, help many testing quality control unit and the quality of school teaching and research units to provide one-stop comprehensive solutions.

注重每一个细节是北广公司对于每个客户的承诺 ， 也是北广公司一直追求的宗旨。北京北广精仪仪器设备有限公司

Pay attention to every detail is this company for every customer commitment, is also the purpose of this company has been pursuing. Beijing all fine instrument equipment co., LTD