耐电压介电击穿电气强度试验仪

耐电压介电击穿电气强度试验仪(bdjc-30kv)

耐电压介电击穿电气强度试验仪满足标准：
仪器依据以下标准中对击穿电压部分的要求制造
GB/T 1408-2006  
GB/T1695-2005  
GB/T3333  
HG/T 3330 
GB12656  
ASTM D149 

仪器特点：
1、本仪器在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性。
2、可以随时调取当前及历史试验数据进行查看，编辑及修改参数。
3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。
4、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果。
5、可设置操作口令，做到专机专人操作，避免无关人员误操作。

试验方法

绝缘材料电气强度试验方法
硫化橡胶工频电压击穿强度和耐电压强度试验 
电缆纸工频电压击穿试验方法 
绝缘漆漆膜击穿强度测定法 
电容器纸工频电压击穿试验方法
固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法

结构特点：
   电压击穿试验仪采用立式箱体结构，极大的节省试验室内占地空间，地脚采用滑轮结构，方便移动和摆放，避免同类厂家生产的卧式设备，安放时需要另配安装台的情况，占地空间大，移动不方便等缺点。本产品采用直流伺服电机加载减速机构，保证了标准里面关于极慢速试验和极快速试验的要求，保证用户可以自由选择升压速率。

主要技术要求：
1、设备输入电压： 交流 100KV (普通试验室电源均可兼容)；
2、试验电压方式： 交流 0--100 KV；
                  直流 0--100 KV；
3、电器容量：10KVA；
4、试验方法：0-100KV全量程可调(采用高精度电压采样器件)；
5、击穿及耐压试验升压速率：
0.1 KV/S 
0.2 KV/S
0.5 KV/S
1.5 KV/S
  2 KV/S
2.5 KV/S
3.0 KV/S(此项满足标准里面极快速升压试验要求)；
6、试验方式：
           直流试验：1、匀速升压  2、阶梯升压  3、耐压试验
           交流试验：1、匀速升压  2、阶梯升压  3、耐压试验
注：根据不同行业的标准，我们可以根据用户的要求，依据贵行业标准，为您定制行业标准所需的特殊测试功能。
7、过电流保护装置应有足够灵敏度以保证试样击穿时在0.1S内切断电源。
8、漏电电流选择：1—100 mA可由计算机软件自由进行设定。
9、本仪器采用无触点原件匀速调压方式(淘汰产品中机械传动升压方式)。
10、支持短时间内短路试验要求。
11、一次试验可以做5个试样。
12、电压测量误差： ≤2％。
13、试验电压连续可调：0-100 KV
14、耐压时间设定：0-6小时(可通过软件连续设定)。
15、主机尺寸：1500mm*1200mm*1600mm（长宽高）。
16、主机重量：约200KG。
17、九级安全防护措施： 
(1) 超压保护
(2)试验过流保护 
(3)试验短路保护
(4)安全门开启保护
(5)软件误操作保护
(6)零电压复位保护
(7)试验结束放电保护
(8)独立保护接地
(9)试验完成后电磁放电

主要配置：

（采用国内或进口配件）
1、 试验主机一台
2、 10万伏电压击穿试验仪高压发生器一台
3、全自动微电脑电压调压装置一套(串口方式)
4、步进电机一台
5、控制系统一套
6、电压及电流采集模块一套
7、过流保护装置一套
8、 试验用电极 ￠25mm两个 ￠75mm一个(可根据材料定制)
9、 试验用油盒一只：材质为有机玻璃
10、放电棒一支（使用方法：试验结束，电机归位后关掉电源开关，拿出放电棒，拉直伸缩杆，将接地夹另一头插入放电帮金属探头插孔中，然后将接地夹夹到仪器接地端上，手握绝缘手柄，打开试验箱玻璃门，用金属探头接触高压头即变压器端。 注意：在每次试验完成后拿出样品前都要事先*放电，在放电时，在放电点接触停留时间超过2秒。）
11、电压击穿计算机测控软件一套
12、计算机一台 
13、彩色喷墨打印机一台
14、*计量鉴定质检证书一份
15、产品使用说明书一份
16、数据线一套
17、合格证一份 
 

        常规型号：

       BDJC-10KV
       BDJC-20KV
       BDJC-50KV
       BDJC-100KV
       BDJC-150KV

北京北广精仪仪器设备有限公司

*的电性能检测产品供应商

Meet the standard:

Instruments according to the requirements of the following standards for the breakdown of the manufacturing
1408-2006 GB/T
GB/T1695-2005
GB/T3333
HG/T 3330
GB12656
D149 ASTM
Instrument characteristics:
1, the instrument in the test process can be used to draw real-time curve of the breakdown process, each test of the boost curve by different color composition, after the end of the test can be superimposed on the test data repeatability of the data.
2, can obtain the current and historical test data to view, edit and modify the parameters.
3, the test process can be modified at any time test conditions and storage path and automatic storage test results.
4, the test process, may at any time through the software to determine whether the test is effective, convenient screening test results.
5, can be set to operate the password, so that the special plane operation, to avoid irrelevant personnel misuse.
test method
Test methods for electrical strength of insulating materials
Power frequency voltage breakdown strength and voltage endurance test of vulcanized rubber
Test method for power frequency voltage breakdown of cable paper
Determination of breakdown strength of insulating paint film
Test method for power frequency voltage breakdown of capacitor paper
Standard Test Method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials at industrial power frequencies
Structure characteristics:
Voltage breakdown testing instrument adopts a vertical enclosure structure, greatly saves the space of indoor test, anchor the pulley structure, easy to move and placed, avoid similar manufacturers horizontal equipment, placed need with installation and, occupying a large area of space, do not move easily shortcomings. This product adopts the DC servo motor to load and speed reduction mechanism, which ensures the latest requirements of the latest standards, the latest requirements of the extremely slow test and very fast test, to ensure that users can freely choose the booster rate.
Main technical requirements:
1, equipment input voltage: AC 100KV (common test room power supply can be compatible);
2, test voltage mode: AC KV 0--100;
DC KV 0--100;
3, electrical capacity: 10KVA;
4, test method: 0-100KV full range adjustable (using high-precision voltage sampling device);
5, breakdown and pressure test boost rate:
0.1 KV/S
0.2 KV/S
0.5 KV/S
1.5 KV/S
2 KV/S
2.5 KV/S
3 KV/S (this is to meet the latest standard inside a very fast boost test requirements);
6, test methods:
DC test: 1, uniform step up 2, step up 3, pressure test
AC test: 1, uniform step up 2, step up 3, pressure test
Note: according to the standards of different industries, we can according to the requirements of users, according to your industry standards, for your custom industry standards required for the special test function.
7, over current protection devices should have sufficient sensitivity to ensure that the sample breakdown in the 0.1S cut off the power supply.
8, leakage current choice: 100 - 1 mA can be set by the computer software free.
9, the instrument adopts no contact original uniform pressure adjustment mode (the elimination of mechanical transmission in the product boost mode).
10, support short time short circuit test request.
11, a test can be done 5 samples.
12, voltage measurement error is less than 2%.
13, the test voltage can be adjusted continuously: KV 0-100
14, time setting: 0-6 hours (can be set through the software).
15, host size: 1500mm*1200mm*1600mm (length width height).
16, the host weight: about 200KG.
17, nine level security measures:
(1) overpressure protection
(2) test of over current protection
(3) test short circuit protection
(4) safety door opening protection
(5) software error protection
(6) zero voltage reset protection
(7) the end of the discharge protection test
(8) independent protection of ground
(9) after the test is completed, the electromagnetic discharge
Main configuration:
(use of domestic or imported accessories)
1, a test host
2, 10 kV voltage breakdown tester, a high voltage generator
3, fully automatic microcomputer voltage regulator device (serial mode)
4, stepper motor
5, a set of control system
6, voltage and current acquisition module set
7, over current protection device set
8, test of two electrode 25mm Phi 75mm a (according to the material can be customized)
9, test oil box one: material for organic glass
10, discharging rod a (using the method: the end of the experiment, motor homing after turning off the power switch, out of the discharging rod, straighten escopic rod, grounding clip on the other end into the discharge for metal probe insertion in, then the grounding clip clip to the instrument grounding end on, holding an insulation handle. And opened the door of the test box of glass, high head the transformer end in contact with a metal probe. Note: before each test is completed, the sample must be fully discharged in advance, in the discharge, the discharge point of contact for more than 2 seconds.
11, voltage breakdown computer control software set
12, a computer
13, color inkjet printer
14, the national level measurement and identification of a quality certificate
15, a copy of the instructions of the product
16, a set of data lines
17, a certificate of qualification